42,192.62$
Cisco Nexus 6004EF switch – 24 ports – Managed – rack-mountable
Cisco Nexus 6004EF switch – 24 ports – Managed – rack-mountable
The Cisco Nexus 6004 switch is a critical component of the Cisco Unified Data Center architecture, complementing the existing Cisco Nexus Family of switches. The Cisco Nexus 6004 offers the industry’s high 10 and 40 Gigabit Ethernet and Fiber Channel over Ethernet (FCoE) port density in a compact energy-efficient form factor, with integrated Layer 2 and Layer 3 features at wire speed and low latency of approximately 1 microsecond for any packet size. It runs the industry-leading Cisco NX-OS software operating system, offering features and capabilities that are widely deployed throughout the world.
The Cisco Nexus 6004 is a four-rack-unit (4RU) 10 and 40 Gigabit Ethernet switch offering wire-speed performance for up to ninety-six 40 Gigabit Ethernet ports or three hundred eighty-four 10 Gigabit Ethernet ports (using Quad Small Form-Factor Pluggable [QSFP] breakout cables) for Ethernet and FCoE traffic with an overall throughput of 7.68 terabits per second (Tbps). The Cisco Nexus 6004 also supports 1 gigabit connectivity using QSFP to SFP or Enhanced SFP (SFP+) adapters, offering customers additional flexibility. The Cisco Nexus 6004 offers eight line-card expansion module (LEM) slots to support a total of 96 ports of 40 Gbps throughput in a fully populated system. The Cisco Nexus 6004, through its extensible architecture, provides customers with a low-cost entry point for small-scale deployments. Thus, the Cisco Nexus 6004 chassis along with the LEMs offers incredible flexibility for scaling deployments, making it the only fully extensible fixed 10 and 40 Gigabit Ethernet platform in the industry.
The Cisco Nexus 6004 as a high-density 10 and 40 Gigabit Ethernet and FCoE platform can be deployed in multiple scenarios – direct-attach 10 and 40 Gigabit Ethernet server-access and high-density fabric extender aggregation deployments, leaf-and-spine architectures, and compact aggregation deployments – to build a scalable Cisco Unified Fabric across a diverse set of physical and virtual server environments in data centers.
Cisco Nexus 6004EF – switch – 24 ports – Managed – rack-mountable | |
---|---|
Device Type | Switch – 24 ports – Managed |
Enclosure Type | Rack-mountable 4U |
Subtype | 40 Gigabit Ethernet |
Ports | 24 x 40 Gigabit QSFP+ |
Performance | Forwarding performance: 7.68 Tbps |
Capacity | Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000 |
MAC Address Table Size | 256K entries |
Jumbo Frame Support | 9216 bytes |
Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
Features | Modular design, hot swap module replacement, VLAN support, Syslog support, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), hot swappable 4 fans, Class of Service (CoS), broadcast storm protection |
Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz |
Power | AC 120/230 V (50/60 Hz) |
Power Redundancy | Yes |
Dimensions (WxDxH) | 43.9 cm x 76.2 cm x 17.7 cm |
Manufacturer Warranty | 1 year warranty |
Bundled Services | 1 year warranty |
General | |
Authentication Method | RADIUS, TACACS+ |
Capacity | Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000 |
Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz |
Device Type | Switch – 24 ports – Managed |
Enclosure Type | Rack-mountable 4U |
Features | Modular design, hot swap module replacement, VLAN support, Syslog support, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), hot swappable 4 fans, Class of Service (CoS), broadcast storm protection |
Jumbo Frame Support | 9216 bytes |
MAC Address Table Size | 256K entries |
Performance | Forwarding performance: 7.68 Tbps |
Ports | 24 x 40 Gigabit QSFP+ |
Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
Subtype | 40 Gigabit Ethernet |
Dimensions & Weight | |
Depth | 76.2 cm |
Height | 17.7 cm |
Width | 43.9 cm |
Environmental Parameters | |
Humidity Range Operating | 5 – 95% (non-condensing) |
Max Operating Temperature | 40 °C |
Max Storage Temperature | 70 °C |
Min Operating Temperature | 0 °C |
Min Storage Temperature | -40 °C |
Expansion / Connectivity | |
Expansion Slots | 8 (total) / 6 (free) x Expansion Slot |
Installed Modules Qty (Max) | 2 (installed) / 8 (max) |
Interfaces | 24 x 40Gbit LAN – QSFP+ ¦ 1 x USB ¦ 1 x management |
Manufacturer Warranty | |
Service & Support | Limited warranty – advance parts replacement – 1 year – response time: 10 days |
Miscellaneous | |
Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A |
Power | |
Installed Qty | 6 (installed) / 6 (max) |
Power Consumption Operational | 3300 Watt |
Power Device | Internal power supply – hot-plug |
Power Provided | 1100 Watt |
Power Redundancy | Yes |
Power Redundancy Scheme | N+N |
Voltage Required | AC 120/230 V (50/60 Hz) |