Cisco Nexus 5548UP

54,684.57$

Cisco Nexus 5548UP switch – 48 ports – Managed – rack-mountable – with 6x Cisco Nexus 2248TP GE Fabric Extender

SKU: N5548UPM-6N2248TP Categories: , Tag:

Description

Cisco Nexus 5548UP switch – 48 ports – Managed – rack-mountable – with 6x Cisco Nexus 2248TP GE Fabric Extender

Today’s data centers are increasingly filled with dense rack-mount and blade servers that host powerful multicore processors. The rapid increase in in-rack computing density and the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet and consolidated I/O: applications for which the Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, and rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, and high-performance computing environments, thus giving customers the flexibility to meet and scale their data center requirements in a gradual manner and at a pace that aligns with their business objectives.

The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fiber Channel over Ethernet (FCoE) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling.

In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supply and fan module.

The Cisco Nexus 5548UP Switch delivers innovative architectural flexibility, infrastructure simplicity, and business agility, with support for networking standards. For traditional, virtualized, unified, and high-performance computing (HPC) environments, it offers a long list of IT and business advantages.

Cisco Nexus 5548UP – switch – 48 ports – Managed – rack-mountable – with 6x Cisco Nexus 2248TP GE Fabric Extender
Device Type Switch – 48 ports – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x SFP+
MAC Address Table Size 32K entries
Jumbo Frame Support 9216 bytes
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Features Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+)
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p
Power AC 120/230 V ( 50/60 Hz )
Power Redundancy Yes
Dimensions (WxDxH) 43.9 cm x 74.9 cm x 4.4 cm
Weight 15.88 kg
Manufacturer Warranty 1 year warranty
Bundled Services 1 year warranty
General
Authentication Method RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2)
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p
Device Type Switch – 48 ports – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender
Enclosure Type Rack-mountable – 1U
Encryption Algorithm AES
Features Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+)
Jumbo Frame Support 9216 bytes
MAC Address Table Size 32K entries
Ports 48 x SFP+
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Subtype 10 Gigabit Ethernet
Dimensions & Weight
Depth 74.9 cm
Height 4.4 cm
Weight 15.88 kg
Width 43.9 cm
Environmental Parameters
Humidity Range Operating 5 – 95% (non-condensing)
Max Operating Temperature 40 °C
Max Storage Temperature 70 °C
Min Operating Temperature 0 °C
Min Storage Temperature -40 °C
Expansion / Connectivity
Expansion Slots 1 (total) / 0 (free) x Expansion Slot
Interfaces 48 x SFP+ ¦ 1 x 1000Base-T – RJ-45 – management ¦ 1 x console – management
Manufacturer Warranty
Service & Support 1 year warranty
Service & Support Details Limited warranty – replacement – 1 year – response time: 10 days
Miscellaneous
Mounting Kit Included
Power
Installed Qty 2
Power Device Internal power supply – hot-plug
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V ( 50/60 Hz )