Cisco IPS Sensor 4260

15,408.60$

Cisco IPS Sensor 4260 security appliance

SKU: IPS-4260-2SX-K9 Categories: , Tag:

Description

Cisco IPS Sensor 4260 security appliance

The Cisco IPS 4260 delivers 1 gigabit of protection performance and can be used to protect both gigabit subnets and aggregated traffic traversing switches from multiple subnets. This purpose-built device supports both copper and fiber network interface card (NIC) environments, providing flexibility of deployment.

Cisco IPS Sensor 4260 – security appliance
Device Type Security appliance
Form Factor Rack-mountable – 2U
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Performance Intrusion prevention throughput: 1 Gbps
Power AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH) 43.5 cm x 50.8 cm x 8.8 cm
Weight 18.1 kg
Manufacturer Warranty 90 days warranty
General
Depth 50.8 cm
Device Type Security appliance
Height 8.8 cm
Height (Rack Units) 2U
Weight 18.1 kg
Width 43.5 cm
Environmental Parameters
Humidity Range Operating 10 – 85%
Max Operating Temperature 35 °C
Min Operating Temperature 10 °C
Expansion / Connectivity
Interfaces 1 x 1000Base-T (management) – RJ-45 ¦ 2 x 1000Base-SX
Manufacturer Warranty
Service & Support Limited warranty – replacement – 90 days – response time: 10 days
Miscellaneous
Compliant Standards NEBS level 3, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, AS/NZS 3260, AS/NZ 3548 Class A, ICES-003 Class A, FCC CFR47 Part 15, FCC Part 15 A
Networking
Authentication Method Secure Shell (SSH)
Compliant Standards IEEE 802.1Q
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Features ARP support, MPLS support, VLAN support, Intrusion Detection System (IDS), IPv6 support, Intrusion Prevention System (IPS), Access Control List (ACL) support
Form Factor Rack-mountable
Performance Intrusion prevention throughput: 1 Gbps
Remote Management Protocol Telnet, HTTP, SSH
Status Indicators Power, status
Power
Installed Qty 2
Max Supported Qty 2
Power Device Internal power supply – hot-plug
Voltage Required AC 120/230 V ( 50/60 Hz )