Cisco IAD 886 with Annex B and 2BRI

587.78$

Cisco IAD 886 with Annex B and 2BRI router – ISDN/DSL – desktop

SKU: IAD886B-K9 Categories: , Tag:

Description

Cisco IAD 886 with Annex B and 2BRI router – ISDN/DSL – desktop

The Cisco IAD 880 series integrated access devices are cost-effective fixed configuration customer premises equipment for service providers offering managed voice and data services. The Cisco IAD 880 series offers cost-effective platforms for providing interconnect solutions for accelerating the migration from time-division multiplexing (TDM) to voice over IP (VoIP). The Cisco IAD 880 series provides secure concurrent services, including firewall, content filtering, VPNs, and WLANs, at broadband speeds to small offices. The Cisco IAD 880 series includes fixed-configuration platforms with voice ports, WAN uplinks, embedded encryption acceleration, voice digital-signal-processor (DSP) slots on the motherboard, and intrusion-prevention-system (IPS) and IP Security (IPsec) features while maintaining a desktop form factor for space-saving service provider managed services deployments.

Cisco IAD 886 with Annex B and 2BRI – router – ISDN/DSL – desktop
Device Type Router – ISDN / DSL modem combo – 4-port switch (integrated)
Enclosure Type Desktop
Digital Signaling Protocol ADSL, ADSL2, ADSL2+
WAN Ports Qty 4
Data Link Protocol Ethernet, Fast Ethernet
Capacity IPSec VPN tunnels: 20
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS, L2TPv3
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, FTP, SSH
VoIP Functionality VoIP phone adapter
VoIP Protocols MGCP, SIP, H.323 v3, H.323 v4, H.323 v1, H.323 v2
Telephony Interfaces 2 line (ISDN BRI)
Features Firewall protection, auto-sensing per device, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Compliant Standards IEEE 802.1D, IEEE 802.1Q
Power AC 120/230 V (50/60 Hz)
Dimensions (WxDxH) 32.5 cm x 24.9 cm x 4.8 cm
Manufacturer Warranty 1 year warranty
General
Capacity IPSec VPN tunnels: 20
Compliant Standards IEEE 802.1D, IEEE 802.1Q, EN 60950, IEC 61000-4-11, IEC950, UL 1950, VCCI-II, IEC 60950, ACA TS001, AS/NZS 3260, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 68, CS-03, EN 61000-4-5, EN 61000-4-8
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet
Device Type Router – 4-port switch (integrated)
Enclosure Type Desktop
Encryption Algorithm DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features Firewall protection, auto-sensing per device, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory 256 MB
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS, L2TPv3
RAM 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, FTP, SSH
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators Power, link OK, status, link/activity
Communications
Digital Signaling Protocol ADSL, ADSL2, ADSL2+
Protocols & Specifications ITU G.992.3 (G.DMT.bis), ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex B
Type ISDN / DSL modem combo
Dimensions & Weight
Depth 24.9 cm
Height 4.8 cm
Width 32.5 cm
Environmental Parameters
Humidity Range Operating 10 – 85%
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Expansion Slots 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 2 x BRI ¦ Serial: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ WAN: 1 x BRI ST
IP Telephony
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, silence suppression
Telephony Interfaces 2 line (ISDN BRI)
VoIP Functionality VoIP phone adapter
VoIP Protocols MGCP, SIP, H.323 v3, H.323 v4, H.323 v1, H.323 v2
Voice Codecs G.711, G.723.1, G.728, G.729, G.729a, G.729ab, G.726
Manufacturer Warranty
Service & Support Limited warranty – 1 year
Power
Power Device External power adapter
Voltage Required AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided Cisco IOS Advanced Security