Cisco Catalyst 3560E-48TD
10,185.37$
Cisco Catalyst 3560E-48TD switch – 48 ports – Managed – rack-mountable
Description
Cisco Catalyst 3560E-48TD switch – 48 ports – Managed – rack-mountable
Cisco Catalyst 3560-E Series is an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. The Cisco Catalyst 3560-E Series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video. Cisco Catalyst 3560-E Series aggregation switches deliver secure non-stop unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.
| Cisco Catalyst 3560E-48TD – switch – 48 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 48 ports – L3 – Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 + 2 x X2 |
| Performance | Switching capacity: 128 Gbps ¦ Forwarding performance: 101.2 Mpps |
| Capacity | Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2 |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Features | Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Power | AC 120/230 V (50/60 Hz) |
| Dimensions (WxDxH) | 44.5 cm x 44.19 cm x 4.45 cm |
| Weight | 8.6 kg |
| Manufacturer Warranty | Limited lifetime warranty |
| Bundled Services | Limited lifetime warranty |
| General | |
| Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Capacity | Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Device Type | Switch – 48 ports – L3 – Managed |
| Enclosure Type | Desktop, rack-mountable 1U |
| Features | Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing |
| Flash Memory | 64 MB Flash |
| Jumbo Frame Support | 9216 bytes |
| Performance | Switching capacity: 128 Gbps ¦ Forwarding performance: 101.2 Mpps |
| Ports | 48 x 10/100/1000 + 2 x X2 |
| RAM | 128 MB |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Routing Protocol | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2 |
| Status Indicators | Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
| Subtype | Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 44.19 cm |
| Height | 4.45 cm |
| Weight | 8.6 kg |
| Width | 44.5 cm |
| Environmental Parameters | |
| Humidity Range Operating | 0 – 95% (non-condensing) |
| Humidity Range Storage | 10 – 85% (non-condensing) |
| Max Operating Temperature | 45 °C |
| Max Storage Temperature | 70 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -25 °C |
| Expansion / Connectivity | |
| Interfaces | 48 x 1000Base-T – RJ-45 ¦ 1 x console – RJ-45 – management ¦ 1 x 100Base-TX – RJ-45 – management ¦ 2 x 10Gb Ethernet – X2 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – lifetime – response time: 10 days |
| Miscellaneous | |
| Compliant Standards | NEBS level 3, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1 |
| MTBF | 166,907 hours |
| Power | |
| Features | Redundant Power System (RPS) connector |
| Power Device | Internal power supply |
| Power Provided | 265 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| Software Included | Cisco IOS IP Services |
Related products
Cisco UCS 2204XP Fabric Extender
Cisco UCS 2204XP Fabric Extender expansion module - 4 portsCisco UCS 2204XP Fabric Extender expansion module - 4 ports
Cisco Catalyst Compact 2960C-8PC-L
Cisco Catalyst Compact 2960C-8PC-L switch - 8 ports - Managed - rack-mountableCisco Catalyst Compact 2960C-8PC-L switch - 8 ports - Managed - rack-mountable
Cisco Catalyst 3560X-24T-E
Cisco Catalyst 3560X-24T-E switch - 24 ports - Managed - rack-mountableCisco Catalyst 3560X-24T-E switch - 24 ports - Managed - rack-mountable