Cisco C887VAGW+7-E-K9
1,048.31$
Cisco C887VAGW+7-E-K9 wireless router – DSL/WWAN – 802.11b/g/n (draft 2.0) – desktop
Description
Cisco C887VAGW+7-E-K9 wireless router – DSL/WWAN – 802.11b/g/n (draft 2.0) – desktop
Cisco 880 series integrated services routers are fixed-configuration routers that provide collaborative business solutions for secure voice and data communication to small businesses and enterprise teleworkers. In addition, the Web-based Cisco configuration professional configuration tool simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.
| Cisco C887VAGW+7-E-K9 – wireless router – DSL/WWAN – 802.11b/g/n (draft 2.0) – desktop | |
|---|---|
| Device Type | Wireless router – DSL modem / wireless cellular modem – 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| Cellular Protocol | GPRS, UMTS, EDGE, HSPA, HSPA+ |
| WAN Ports Qty | 2 |
| Data Link Protocol | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Frequency Band | 2.4 GHz / 5 GHz |
| Capacity | IPSec VPN tunnels: 20 |
| Network / Transport Protocol | L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS |
| Routing Protocol | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR) |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Features | NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x |
| Power | AC 120/230 V (50/60 Hz) |
| Manufacturer Warranty | 1 year warranty |
| General | |
| Authentication Method | RADIUS, TACACS+ |
| Capacity | IPSec VPN tunnels: 20 |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, EN300-386, FCC CFR47 Part 15 B, VCCI V-3 |
| Connectivity Technology | Wireless, wired |
| Data Link Protocol | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Device Type | Wireless router – 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Encryption Algorithm | LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features | NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD) |
| Flash Memory | 256 MB |
| Frequency Band | 2.4 GHz / 5 GHz |
| Network / Transport Protocol | L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS |
| RAM | 512 MB (installed) / 512 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Routing Protocol | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR) |
| Status Indicators | Port status, power |
| Aerial | |
| Aerial | External detachable |
| Antenna Qty | 3 |
| Directivity | Omni-directional |
| Gain Level | 2 dBi |
| Communications | |
| Cellular Protocol | GPRS, UMTS, EDGE, HSPA, HSPA+ |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| Protocols & Specifications | ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.993.2 |
| Type | DSL modem / wireless cellular modem |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 85% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2 |
| Line Properties | |
| Framing Format | ANSI T1.413 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – 1 year |
| Power | |
| Power Device | External power adapter – 60 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| OS Provided | Cisco IOS Advanced Security |
Related products
Cisco WAN Network Interface Module
Cisco WAN Network Interface Module serial adapterCisco WAN Network Interface Module serial adapter
