Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant
573.35$
Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant router – DSL modem – desktop
Description
Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant router – DSL modem – desktop
The Cisco 880 ISR provides Internet, VPN, data, and backup capability to corporate teleworkers and remote and small offices of fewer than 20 users. These routers are capable of bridging and multiprotocol routing between LAN and WAN ports, and provide advanced features such as antivirus protection.
| Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant – router – DSL modem – desktop | |
|---|---|
| Device Type | Router – DSL modem – 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| WAN Ports Qty | 2 |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Capacity | IPSec VPN tunnels: 20 |
| Network / Transport Protocol | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| Routing Protocol | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Features | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x |
| Power | AC 120/230 V (50/60 Hz) |
| Dimensions (WxDxH) | 32.5 cm x 26.4 cm x 4.4 cm |
| Weight | 2.5 kg |
| Manufacturer Warranty | 1 year warranty |
| General | |
| Authentication Method | RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST |
| Capacity | IPSec VPN tunnels: 20 |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Device Type | Router – 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Encryption Algorithm | LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory | 128 MB |
| Network / Transport Protocol | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| RAM | 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Routing Protocol | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Status Indicators | Port status, power |
| Communications | |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| Protocols & Specifications | ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A |
| Type | DSL modem |
| Dimensions & Weight | |
| Depth | 26.4 cm |
| Height | 4.4 cm |
| Weight | 2.5 kg |
| Width | 32.5 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 85% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Expansion Slots | 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2 |
| Line Properties | |
| Framing Format | ANSI T1.413 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – 1 year |
| Power | |
| Power Device | External power adapter – 60 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| OS Provided | Cisco IOS Advanced Security |
Related products
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module expansion moduleCisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module expansion module
Cisco Fourth-Generation Network Interface Module
Cisco Fourth-Generation Network Interface Module voice / fax moduleCisco Fourth-Generation Network Interface Module voice / fax module
