Cisco 5760 Wireless Controller

67,696.08$

Cisco 5760 Wireless Controller network management device

Description

Cisco 5760 Wireless Controller network management device

The Cisco 5760 Wireless Controller is an industry-leading platform designed for 802.11ac networks with maximum performance and services at scale, combined with high availability for mission-critical wireless networks. Through the Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC), it delivers wire-speed performance with services such as advanced quality of service (QoS), flexible NetFlow v9, and downloadable ACLs.

The 5760 Wireless Controller can operate in both converged access mode and centralized mode. Converged access mode provides hierarchical network design that distributes the wireless data plane at the access layer on Cisco Catalyst switches for maximum performance and scale. Converged access mode provides maximum resiliency by constraining outages to smaller failure domains. Additionally, converged access mode delivers high availability with access point stateful failover, making sure SSIDs are highly available and have minimal effect on wireless clients.

Cisco 5760 Wireless Controller – network management device
Device Type Network management device
Licence Qty 250 MAPs (managed access points)
Form Factor External – 1U
Ports Qty 6
Data Link Protocol Gigabit Ethernet, 10 Gigabit Ethernet
Capacity Manageable access points: 250
Power AC 120/230 V (50/60 Hz)
Power Redundancy Optional
Dimensions (WxDxH) 44.5 cm x 45 cm x 4.45 cm
Weight 7.8 kg
Manufacturer Warranty 90 days warranty
General
Depth 45 cm
Device Type Network management device
Height 4.45 cm
Height (Rack Units) 1U
Weight 7.8 kg
Width 44.5 cm
Environmental Parameters
Humidity Range Operating 5 – 95% (non-condensing)
Max Operating Temperature 45 °C
Min Operating Temperature -5 °C
Expansion / Connectivity
Expansion Slots 6 (total) / 6 (free) x SFP+
Interfaces 1 x management – RJ-45 ¦ 1 x 1000Base-T (management) – RJ-45 ¦ 1 x USB ¦ 2 x USB – Type A ¦ 2 x network stack device
Manufacturer Warranty
Service & Support Limited warranty – advance parts replacement – 90 days – response time: 10 days
Miscellaneous
Compliant Standards CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, CISPR 22, AS/NZS 60950-1, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1, ICES Class A, VCCI Class A
Rack Mounting Kit Included
Networking
Authentication Method RADIUS, Radio Service Set ID (SSID), TACACS, Extensible Authentication Protocol (EAP)
Capacity Manageable access points: 250
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3x, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.1AX, IEEE 802.11ac
Connectivity Technology Wired
Data Link Protocol Gigabit Ethernet, 10 Gigabit Ethernet
Encryption Algorithm DES, Triple DES, RC4, MD5, AES, 128-bit WEP, 40-bit WEP, IKE, SSL, TLS 1.0, 104-bit WEP, TKIP, WPA, WPA2, PKI, AES-CCMP, 128-bit AES, AES-CCM, AES-CBC, DTLS, 1024-bit RSA, 2048-bit RSA, TLS 1.1
Features DHCP support, BOOTP support, ARP support, Syslog support, manageable, IPv6 support, SNTP support, Stateful switchover (SSO), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Cisco StackWise Technology, CleanAir technology, NetFlow, CAPWAP support, ClientLink 2.0 technology
Form Factor External
Network / Transport Protocol TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP
Ports Qty 6
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Routing Protocol CIDR
Status Indicators Port transmission speed, port duplex mode, power, system, status, link/activity
Switching Protocol Ethernet
Power
Installed Qty 1
Max Supported Qty 2
Power Device Internal power supply – hot-plug
Power Provided 350 Watt
Power Redundancy Optional
Voltage Required AC 120/230 V (50/60 Hz)