Cisco 5760 Wireless Controller

38,685.53$

Cisco 5760 Wireless Controller network management device

Description

Cisco 5760 Wireless Controller network management device

The Cisco 5760 Wireless Controller is an industry-leading platform designed for 802.11ac networks with maximum performance and services at scale, combined with high availability for mission-critical wireless networks. Through the Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC), it delivers wire-speed performance with services such as advanced quality of service (QoS), flexible NetFlow v9, and downloadable ACLs.

The 5760 Wireless Controller can operate in both converged access mode and centralized mode. Converged access mode provides hierarchical network design that distributes the wireless data plane at the access layer on Cisco Catalyst switches for maximum performance and scale. Converged access mode provides maximum resiliency by constraining outages to smaller failure domains. Additionally, converged access mode delivers high availability with access point stateful failover, making sure SSIDs are highly available and have minimal effect on wireless clients.

Cisco 5760 Wireless Controller – network management device
Device Type Network management device
Licence Qty 100 MAPs (managed access points)
Form Factor External – 1U
Ports Qty 6
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet
Capacity Manageable access points: 100
Power AC 120/230 V (50/60 Hz)
Power Redundancy Optional
Dimensions (WxDxH) 44.5 cm x 45 cm x 4.45 cm
Manufacturer Warranty 90 days warranty
General
Depth 45 cm
Device Type Network management device
Height 4.45 cm
Height (Rack Units) 1U
Width 44.5 cm
Environmental Parameters
Humidity Range Operating 5 – 95% (non-condensing)
Max Operating Temperature 45 °C
Min Operating Temperature -5 °C
Expansion / Connectivity
Interfaces 1 x management – RJ-45 ¦ 1 x 1000Base-T (management) – RJ-45 ¦ 1 x management (USB) – Type B ¦ 2 x USB – Type A ¦ 6 x 10Gb Ethernet – SFP+
Manufacturer Warranty
Service & Support Limited warranty – 90 days
Miscellaneous
Compliant Standards CISPR 22 Class A, CISPR 24, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, CAN/CSA C22.2 No. 60950-1, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2004/108/CE, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 61000-3-12:2011, AS/NZS CISPR22:2006 Class A
Networking
Authentication Method Secure Shell (SSH), RADIUS, X.509 certificates, Radio Service Set ID (SSID), TACACS, Extensible Authentication Protocol (EAP)
Capacity Manageable access points: 100
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3x, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.11k, IEEE 802.1AX, IEEE 802.11ac
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet
Encryption Algorithm DES, Triple DES, SHA, RC4, MD5, AES, IKE, SSL, TLS 1.0, TKIP, WPA, WPA2, PKI, AES-CCMP, AES-CCM, AES-CBC, DTLS, 1024-bit RSA, 2048-bit RSA, TLS 1.1, WEP
Features DHCP support, BOOTP support, ARP support, Syslog support, manageable, IPv6 support, deep inspection, full duplex mode, SNTP support, Stateful switchover (SSO), Wi-Fi Multimedia (WMM) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Cisco StackWise Technology, CleanAir technology, NetFlow, CAPWAP support, Management Information Base (MIB), Cisco VideoStream technology, 802.1x authentication, ClientLink 3.0 technology
Form Factor External
Network / Transport Protocol TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP
Ports Qty 6
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Routing Protocol CIDR
Status Indicators Power, system, active, link/activity
Switching Protocol Ethernet
Power
Max Supported Qty 2
Power Device Internal power supply – hot-plug
Power Provided 350 Watt
Power Redundancy Optional
Voltage Required AC 120/230 V (50/60 Hz)