Cisco Nexus 5020
42,776.48$
Cisco Nexus 5020 switch – 40 ports – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender (48×100/1000-BaseT + 4x10GE (req SFP+) (N2K-C2248TP-1GE)
Description
Cisco Nexus 5020 switch – 40 ports – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender (48×100/1000-BaseT + 4x10GE (req SFP+) (N2K-C2248TP-1GE)
The Cisco Nexus 5020 switch is a 2 RU, top-of-rack switch that provides Ethernet and Fiber Channel consolidation in a single physical cable. The Fiber Channel over Ethernet (FCoE) protocol is used to consolidate Ethernet and Fiber Channel traffic onto the same physical connection between the server and the switch. As a top-of-rack switch, all the servers in the rack connect to the Cisco Nexus 5020 switch, and it connects to the LAN or SAN.
The Cisco Nexus 5020 switch is a part of a family of switches that provide 10-Gigabit Ethernet and FCoE ports and both 10-Gigabit Ethernet and native 1-, 2-, and 4-Gbps Fiber Channel ports. The switches provide consolidated I/O connectivity to both production Ethernet LANs and Fiber Channel SANs in a cost-effective, high-performance, low-latency Ethernet switch.
| Cisco Nexus 5020 – switch – 40 ports – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender (48×100/1000-BaseT + 4x10GE (req SFP+) (N2K-C2248TP-1GE) | |
|---|---|
| Device Type | Switch – 40 ports – L4-L7 – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender (48×100/1000-BaseT + 4x10GE (req SFP+) (N2K-C2248TP-1GE) |
| Enclosure Type | 2U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 40 x SFP+ |
| MAC Address Table Size | 16K entries |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2 |
| Features | Layer 2 switching, trunking, VLAN support, Syslog support, packet filtering, Weighted Round Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, ASIC VPN, Multicast Storm Control, Unicast Storm Control, Per-VLAN Spanning Tree (PVST), Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support |
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP) |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 43.9 cm x 76.2 cm x 8.8 cm |
| Localisation | North America |
| Manufacturer Warranty | 1 year warranty |
| Bundled Services | 1 year warranty |
| General | |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2) |
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP) |
| Device Type | Switch – 40 ports – L4-L7 – Managed – with 6x Cisco Nexus 2248TP GE Fabric Extender (48×100/1000-BaseT + 4x10GE (req SFP+) (N2K-C2248TP-1GE) |
| Enclosure Type | Desktop 2U |
| Encryption Algorithm | AES |
| Features | Layer 2 switching, trunking, VLAN support, Syslog support, packet filtering, Weighted Round Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, ASIC VPN, Multicast Storm Control, Unicast Storm Control, Per-VLAN Spanning Tree (PVST), Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support |
| Fibre Channel | FC-DA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-SW-2, FC-SW-3, FC-SP, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-FS-2, FCP-3, FC-LS, FC-MI-2, FC-PI-4 |
| MAC Address Table Size | 16K entries |
| Ports | 40 x SFP+ |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2 |
| Subtype | 10 Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 76.2 cm |
| Height | 8.8 cm |
| Width | 43.9 cm |
| Environmental Parameters | |
| Humidity Range Operating | 5 – 95% |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Expansion Slots | 2 (total) / 2 (free) x Expansion Slot |
| Interfaces | 1 x console ¦ 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45 – management ¦ 40 x SFP+ |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – replacement – 1 year – response time: 10 days |
| Miscellaneous | |
| Compliant Standards | FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS |
| Localisation | North America |
| Power | |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Device | Internal power supply – hot-plug |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| Software Included | Cisco NX-OS 4.2(1)N1(1) |
Related products
Cisco
Cisco SFP (mini-GBIC) transceiver module - Ethernet, Fast Ethernet, Gigabit EthernetCisco SFP (mini-GBIC) transceiver module - Ethernet, Fast Ethernet, Gigabit Ethernet
Cisco Catalyst 6800 Series 10 Gigabit Ethernet Fiber Module with dual DFC4
Cisco Catalyst 6800 Series 10 Gigabit Ethernet Fiber Module with dual DFC4 expansion moduleCisco Catalyst 6800 Series 10 Gigabit Ethernet Fiber Module with dual DFC4 expansion module
Cisco network adapter cable
Cisco network adapter cableCisco network adapter cable