5,193.05$
Cisco Catalyst 3650-8X24PD-S switch – 24 ports – Managed – rack-mountable
Cisco Catalyst 3650-8X24PD-S switch – 24 ports – Managed – rack-mountable
The Cisco Catalyst switch is the enterprise-class standalone and stackable access-layer switch, that provides the foundation for full convergence between wired and wireless on a single platform. The switch is built on the advanced Cisco StackWise-160, and takes advantage of the Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The switch supports full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE) on the Cisco Catalyst Multigigabit switches, and offer modular and field-replaceable redundant fans and power supplies. The switch also comes in a lower-depth form factor, so that you can deploy it in tight wiring closets in remote branches and offices, where depth of the switch is a concern. In addition, the Multigigabit switch supports wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure. The switch helps increase wireless productivity and reduce TCO.
Cisco Catalyst 3650-8X24PD-S – switch – 24 ports – Managed – rack-mountable | |
---|---|
Device Type | Switch – 24 ports – L3 – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 16 x 10/100/1000 (UPOE) + 8 x 100/1000/2.5G/5G/10G (UPOE) + 2 x 10 Gigabit SFP+ (uplink) |
Power Over Ethernet (PoE) | PoE+ |
Performance | Switching capacity: 272 Gbps ¦ Forwarding performance: 202.38 Mpps ¦ Stacking bandwidth: 160 Gbps |
Capacity | IPv4 routes: 24000 ¦ NetFlow entries: 24000 ¦ Virtual interfaces (VLANs): 4094 ¦ Switched virtual interfaces (SVIs): 1000 ¦ IPv4 routes: 24000 |
MAC Address Table Size | 32000 entries |
Jumbo Frame Support | 9198 bytes |
Routing Protocol | BGP-4, IS-IS, RIP-1, RIP-2, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
Features | Full duplex capability, Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Strict Priority Queuing (SPQ), Class of Service (CoS), Flexible NetFlow (FNF), DiffServ Code Point (DSCP) support |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at |
Power | AC 120/230 V (50/60 Hz) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44.5 cm x 48.6 cm x 4.4 cm |
Weight | 7.5 kg |
Manufacturer Warranty | Limited lifetime warranty |
Bundled Services | Limited lifetime warranty |
General | |
Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Capacity | IPv4 routes: 24000 ¦ NetFlow entries: 24000 ¦ Virtual interfaces (VLANs): 4094 ¦ Switched virtual interfaces (SVIs): 1000 ¦ IPv4 routes: 24000 |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at |
Device Type | Switch – 24 ports – L3 – Managed – stackable |
Enclosure Type | Desktop, rack-mountable 1U |
Features | Full duplex capability, Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Cisco StackWise Technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Strict Priority Queuing (SPQ), Class of Service (CoS), Flexible NetFlow (FNF), DiffServ Code Point (DSCP) support |
Flash Memory | 4 GB |
Jumbo Frame Support | 9198 bytes |
MAC Address Table Size | 32000 entries |
Performance | Switching capacity: 272 Gbps ¦ Forwarding performance: 202.38 Mpps ¦ Stacking bandwidth: 160 Gbps |
Ports | 16 x 10/100/1000 (UPOE) + 8 x 100/1000/2.5G/5G/10G (UPOE) + 2 x 10 Gigabit SFP+ (uplink) |
Power Over Ethernet (PoE) | PoE+ |
RAM | 4 GB |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
Routing Protocol | BGP-4, IS-IS, RIP-1, RIP-2, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng |
Status Indicators | Port transmission speed, port duplex mode, system, active, status, PoE |
Subtype | Gigabit Ethernet |
Dimensions & Weight | |
Depth | 48.6 cm |
Height | 4.4 cm |
Weight | 7.5 kg |
Width | 44.5 cm |
Environmental Parameters | |
Humidity Range Operating | 5 – 96% (non-condensing) |
Max Operating Temperature | 45 °C |
Max Storage Temperature | 70 °C |
Min Operating Temperature | -5 °C |
Min Storage Temperature | -40 °C |
Expansion / Connectivity | |
Expansion Slots | 1 (total) / 1 (free) x Stacking Module |
Interfaces | 16 x 1000Base-T – RJ-45 – PoE+ ¦ 1 x USB – Type A ¦ 1 x serial (console) – RJ-45 – management ¦ 1 x management (Gigabit LAN) – RJ-45 – management ¦ 1 x management (mini-USB) – Type B – management ¦ 8 x 100/1000/2.5G/5G/10GBase-T – RJ-45 – PoE+ ¦ 2 x 10GBase-X – SFP+ – uplink |
Manufacturer Warranty | |
Service & Support | Limited warranty – replacement – lifetime – response time: next business day ¦ Technical support – phone consulting – 90 days |
Miscellaneous | |
Compliant Standards | CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A |
MTBF | 233,780 hours |
Rack Mounting Kit | Included |
Power | |
Installed Qty | 1 (installed) / 2 (max) |
Power Device | Internal power supply – hot-plug |
Power Provided | 715 Watt |
Power Redundancy | Optional |
Power Redundancy Scheme | 1+1 (with optional power supply) |
Voltage Required | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
Software Included | Cisco IOS IP Base |