Cisco Catalyst 4507R-E Data Bundle
10,794.15$
Cisco Catalyst 4507R-E Data Bundle switch – 96 ports – Managed – rack-mountable
Description
Cisco Catalyst 4507R-E Data Bundle switch – 96 ports – Managed – rack-mountable
This product includes Catalyst 4500 series Supervisor Engine II-Plus (WS-X4013+), 2x Cisco Line Cards (WS-X4148-RJ), and 1000W AC power supply (PWR-C45-1000AC).
| Cisco Catalyst 4507R-E Data Bundle – switch – 96 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 96 ports – L4 – Managed |
| Enclosure Type | Rack-mountable 11U |
| Subtype | Fast Ethernet |
| Ports | 96 x 10/100 + 2 x GBIC |
| MAC Address Table Size | 32K entries |
| Routing Protocol | RIP-1, RIP-2, IGMPv2, HSRP, IGMP, DVMRP, VRRP, static IP routing, IGMPv3, PIM-SSM |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS |
| Features | Modular design, Layer 4 switching, Layer 3 switching, Layer 2 switching, ARP support, VLAN support, IGMP snooping, Syslog support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 44 cm x 31.7 cm x 48.7 cm |
| General | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad |
| Device Type | Switch – 96 ports – L4 – Managed |
| Enclosure Type | Rack-mountable 11U |
| Features | Modular design, Layer 4 switching, Layer 3 switching, Layer 2 switching, ARP support, VLAN support, IGMP snooping, Syslog support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS) |
| Flash Memory | 32 MB Flash |
| MAC Address Table Size | 32K entries |
| Ports | 96 x 10/100 + 2 x GBIC |
| Processor | 1: 266 MHz |
| RAM | 256 MB |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS |
| Routing Protocol | RIP-1, RIP-2, IGMPv2, HSRP, IGMP, DVMRP, VRRP, static IP routing, IGMPv3, PIM-SSM |
| Status Indicators | Port status, power, link OK, active, status |
| Subtype | Fast Ethernet |
| Dimensions & Weight | |
| Depth | 31.7 cm |
| Height | 48.7 cm |
| Width | 44 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% |
| Max Operating Temperature | 40 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Expansion Slots | 7 (total) / 4 (free) x Expansion Slot ¦ 1 CompactFlash Card |
| Installed Modules Qty (Max) | 3 (installed) / 7 (max) |
| Interfaces | 96 x 100Base-TX – RJ-45 ¦ 1 x console – RJ-45 – management ¦ 1 x 100Base-TX – RJ-45 – management ¦ 2 x GBIC |
| Miscellaneous | |
| Compliant Standards | NEBS level 3, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, FCC Part 68, AS/NZ 3548 Class A, ICES-003 Class A, CS-03, FCC CFR47 Part 15 |
| Rack Mounting Kit | Included |
| Power | |
| Installed Qty | 1 (installed) / 2 (max) |
| Power Device | Internal power supply – hot-plug |
| Power Redundancy | Yes |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Related products
Cisco Dispersion Compensation Unit
Cisco Dispersion Compensation Unit transceiverCisco Dispersion Compensation Unit transceiver
