Cisco 886VA Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G

886.93$

Cisco 886VA Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G router – ISDN/DSL – desktop

SKU: C886VAG+7-K9 Categories: , Tag:

Description

Cisco 886VA Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G router – ISDN/DSL – desktop

The Cisco 880 series is ideal for small branch offices and teleworkers who need to be connected to larger enterprise networks as well as small businesses, for either voice or data applications. These routers help extend corporate networks to secure remote sites while giving users access to the same applications found in a corporate office. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The Cisco 880 series meets this need with a single device that combines integrated 802.11 g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with WPA Temporal Key Integrity Protocol (TKIP). The Cisco 880 series models that include the integrated access point can use either autonomous or Cisco unified WLAN modes.

Service providers and value-added resellers can take advantage of the Cisco 880 series to provide a true business-class broadband service. Business customers are using broadband access to connect to the Internet or to connect offices together, and they require a platform that incorporates security without sacrificing performance. These customers also require a higher level of support to keep their networks operational. Services with these customers should be simple to set up, while allowing a level of remote management and troubleshooting to quickly address support inquiries. The Cisco 880 series meets the requirements of small offices and managed services providers.

Cisco 886VA Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G – router – ISDN/DSL – desktop
Device Type Router – ISDN / DSL modem combo – 4-port switch (integrated)
Enclosure Type Desktop
Digital Signaling Protocol ADSL2+ over ISDN, VDSL2 over ISDN
WAN Ports Qty 2
Data Link Protocol Ethernet, Fast Ethernet
Capacity IPSec VPN tunnels: 20
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Features Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af
Power AC 120/230 V (50/60 Hz)
Dimensions (WxDxH) 32.5 cm x 24.9 cm x 4.4 cm
Weight 2.5 kg
General
Authentication Method RADIUS, TACACS+
Capacity IPSec VPN tunnels: 20
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet
Device Type Router – 4-port switch (integrated)
Enclosure Type Desktop
Encryption Algorithm DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy
Flash Memory 128 MB
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators Port status, power
Communications
Digital Signaling Protocol ADSL2+ over ISDN, VDSL2 over ISDN
Protocols & Specifications ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B
Type ISDN / DSL modem combo
Dimensions & Weight
Depth 24.9 cm
Height 4.4 cm
Weight 2.5 kg
Width 32.5 cm
Environmental Parameters
Humidity Range Operating 10 – 85% (non-condensing)
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Expansion Slots 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST
Line Properties
Framing Format ANSI T1.413
Power
Power Device External power adapter – 60 Watt
Voltage Required AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided Cisco IOS Advanced Security