Product Categories
Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base

Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base

5,500.06$

Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base switch – 16 ports – Managed – plug-in module

SKU: WS-CBS3130X-S Categories: , Tag:

Description

Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base switch – 16 ports – Managed – plug-in module

The Cisco Catalyst Blade Server 3130 represents the next-generation networking solution for blade server environments. Built on the market-leading Cisco hardware and Cisco IOS Software, the Cisco Catalyst Blade Switch 3130 is engineered with unique technologies specifically designed to meet the rigors of blade server-based application infrastructure. Specifically, the switch is designed to deliver scalable, high-performance, highly resilient connectivity while supporting ongoing IT initiatives to reduce server infrastructure complexity and total cost of ownership (TCO).

Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base – switch – 16 ports – Managed – plug-in module
Device Type Switch – 16 ports – L3 – Managed – stackable
Enclosure Type Plug-in module
Subtype Gigabit Ethernet
Ports 16 x backplane + 2 x X2 + 4 x 10/100/1000
Routing Protocol RIP-1, RIP-2, static IP routing
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c
Features Routing, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), virtual blade switch (VBS)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Dimensions (WxDxH) 2.9 cm x 24.8 cm x 23.1 cm
Weight 1.8 kg
Manufacturer Warranty 90 days warranty
Bundled Services 90 days warranty
Designed For Dell PowerEdge M1000E
General
Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type Switch – 16 ports – L3 – Managed – stackable
Enclosure Type Plug-in module
Features Routing, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), virtual blade switch (VBS)
Flash Memory 64 MB Flash
Ports 16 x backplane + 2 x X2 + 4 x 10/100/1000
RAM 256 MB DDR SDRAM
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c
Routing Protocol RIP-1, RIP-2, static IP routing
Status Indicators Port status, power, system, status
Subtype Gigabit Ethernet
Compatibility Information
Designed For Dell PowerEdge M1000E
Dimensions & Weight
Depth 24.8 cm
Height 23.1 cm
Weight 1.8 kg
Width 2.9 cm
Environmental Parameters
Humidity Range Operating 10 – 85%
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Interfaces 4 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 2 x network stack device ¦ 1 x console – RJ-45 – management ¦ 16 x 1000Base-X – backplane ¦ 2 x X2
Manufacturer Warranty
Service & Support Limited warranty – 90 days
Miscellaneous
Compliant Standards UL, CISPR 22 Class A, GOST, CISPR 24, cUL, VCCI Class A ITE, EN55024, EN55022 Class A, CB, EMC, MIC, EN 60950-1, FCC Part 15 A
Software / System Requirements
Software Included Cisco IOS IP Base

Related products