793.77$
Cisco ISR 4221 router – rack-mountable
Cisco ISR 4221 router – rack-mountable
The Cisco 4000 series Integrated Services Routers (ISR) revolutionize WAN communications in the enterprise branch. With new levels of built-in intelligent network capabilities and convergence, the routers specifically address the growing need for application-aware networking in distributed enterprise sites. These locations tend to have lean IT resources. But they often also have a growing need for direct communication with both private data centers and public clouds across diverse links, including Multiprotocol Label Switching (MPLS) VPNs and the Internet.
Cisco ISR 4221 – router – rack-mountable | |
---|---|
Device Type | Router |
Enclosure Type | Rack-mountable – modular – 1U |
WAN Ports Qty | 2 |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Performance | Aggregate throughput: 35 Mbps |
Network / Transport Protocol | IPSec, PPPoE, DHCP |
Routing Protocol | OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, DVMRP, PIM-SM, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), IPv4-to-IPv6 Multicast |
Remote Management Protocol | SNMP, RMON |
Features | VPN support, VLAN support, Syslog support, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), wall mountable, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, NetFlow, IPFIX |
Compliant Standards | IEEE 802.3, IEEE 802.1Q, IEEE 802.3ah, IEEE 802.1ag, ANSI T1.101, ITU-T G.823, ITU-T G.824 |
Power | AC 120/230 V (50/60 Hz) |
Dimensions (WxDxH) | 32.26 cm x 25.4 cm x 4.37 cm |
Weight | 3.22 kg |
General | |
Compliant Standards | IEEE 802.3, IEEE 802.1Q, IEEE 802.3ah, IEEE 802.1ag, ANSI T1.101, ITU-T G.823, ITU-T G.824, CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, CS-03, R&TTE, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 3548 Class A, GB 4943, CAN/CSA C22.2 No. 60950-1, VCCI V-3, EN 61000, KN22, KN24, CNS 13438 |
Connectivity Technology | Wired |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Device Type | Router |
Enclosure Type | Rack-mountable – modular – 1U |
Features | VPN support, VLAN support, Syslog support, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), wall mountable, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, NetFlow, IPFIX |
Flash Memory | 8 GB (installed) / 8 GB (max) |
Network / Transport Protocol | IPSec, PPPoE, DHCP |
Performance | Aggregate throughput: 35 Mbps |
RAM | 4 GB (installed) / 4 GB (max) – DDR3 SDRAM |
Remote Management Protocol | SNMP, RMON |
Routing Protocol | OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, DVMRP, PIM-SM, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), IPv4-to-IPv6 Multicast |
Dimensions & Weight | |
Depth | 25.4 cm |
Height | 4.37 cm |
Weight | 3.22 kg |
Width | 32.26 cm |
Environmental Parameters | |
Humidity Range Operating | 5 – 85% |
Max Operating Temperature | 40 °C |
Min Operating Temperature | 0 °C |
Expansion / Connectivity | |
Expansion Slots | 2 (total) / 2 (free) x NIM |
Interfaces | WAN / LAN: 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ Serial: 1 x console – RJ-45 ¦ USB 2.0: 1 x 4 pin USB Type A ¦ 1 x SFP (mini-GBIC) ¦ Management: 1 x 1000Base-T – RJ-45 |
Miscellaneous | |
MTBF | 593270 hours |
Rack Mounting Kit | Included |
Power | |
Power Device | External power adapter |
Voltage Required | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
OS Provided | Cisco IOS IP Base |