Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant

573.35$

Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant router – DSL modem – desktop

SKU: C887VA-W-E-K9 Categories: , Tag:

Description

Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant router – DSL modem – desktop

The Cisco 880 ISR provides Internet, VPN, data, and backup capability to corporate teleworkers and remote and small offices of fewer than 20 users. These routers are capable of bridging and multiprotocol routing between LAN and WAN ports, and provide advanced features such as antivirus protection.

Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant – router – DSL modem – desktop
Device Type Router – DSL modem – 4-port switch (integrated)
Enclosure Type Desktop
Digital Signaling Protocol ADSL2, ADSL2+, VDSL2
WAN Ports Qty 2
Data Link Protocol Ethernet, Fast Ethernet
Capacity IPSec VPN tunnels: 20
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Features Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x
Power AC 120/230 V (50/60 Hz)
Dimensions (WxDxH) 32.5 cm x 26.4 cm x 4.4 cm
Weight 2.5 kg
Manufacturer Warranty 1 year warranty
General
Authentication Method RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity IPSec VPN tunnels: 20
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet
Device Type Router – 4-port switch (integrated)
Enclosure Type Desktop
Encryption Algorithm LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory 128 MB
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators Port status, power
Communications
Digital Signaling Protocol ADSL2, ADSL2+, VDSL2
Protocols & Specifications ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
Type DSL modem
Dimensions & Weight
Depth 26.4 cm
Height 4.4 cm
Weight 2.5 kg
Width 32.5 cm
Environmental Parameters
Humidity Range Operating 10 – 85% (non-condensing)
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Expansion Slots 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2
Line Properties
Framing Format ANSI T1.413
Manufacturer Warranty
Service & Support Limited warranty – 1 year
Power
Power Device External power adapter – 60 Watt
Voltage Required AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided Cisco IOS Advanced Security