Cisco Supervisor2 Enhanced

26,529.47$

Cisco Supervisor2 Enhanced control processor

Description

Cisco Supervisor2 Enhanced control processor

The Cisco Nexus 7000 series Sup2E module is based on a two-quad-core Intel Xeon processor that scales the control plane by harnessing the flexibility and power of the two quad cores. The Sup2E module offers the highest control-plane performance and scalability of the modules: for example, supporting more VDCs and fabric extenders.

Cisco Supervisor2 Enhanced – control processor
Device Type Control processor
Form Factor Plug-in module
Processor 2 x Intel Xeon 2.13 GHz
RAM 32 GB
Flash Memory 8 GB
Dimensions (WxDxH) 38.9 cm x 55.6 cm x 3 cm
Weight 5.25 kg
Designed For Nexus 7000, 7009, 7010, 7010 Fabric-2
General
Depth 55.6 cm
Device Type Control processor
Height 3 cm
Weight 5.25 kg
Width 38.9 cm
Compatibility Information
Designed For Cisco Nexus 7000 Series, 7000 Series 10-Slot Chassis 46-Gbps/Slot Fabric Module, 7000 Series 18-Slot Chassis 110Gbps/Slot Fabric Module, 7000 Series 18-Slot Chassis 46-Gbps/Slot Fabric Module, 7000 Series 9-Slot Chassis, 7000 Series 9-Slot Chassis 110Gbps/Slot Fabric Module, 7009, 7010, 7010 Bundle, 7010 Fabric-2 Module
Environmental Parameters
Humidity Range Operating 5 – 90% (non-condensing)
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Interfaces 1 x management – RJ-45 ¦ 1 x serial ¦ 3 x USB
Miscellaneous
Compliant Standards NEBS level 3, ETSI, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, EMC, ICES-003 Class A, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A, NEBS, CSA C22.2 No. 60950-1, AS/NZS 60950, GR-1089-CORE, VCCI Class A
Networking
Connectivity Technology Wired
Form Factor Plug-in module
Remote Management Protocol SNMP, CLI
Status Indicators Power, active, standby, status
Processor / Memory / Storage
Flash Memory 8 GB
Processors Installed 2 x Intel Xeon 2.13 GHz
RAM 32 GB DDR3 SDRAM
Software / System Requirements
OS Provided Cisco NX-OS 6.0 or later